--- title: Digital Acoustics and CyberGate slug: digital-acoustics-and-cybergate createdAt: 2026-05-19T12:26:27.264Z --- ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/MQnjui5zQ-4-i9Uj1RNQh-20260610-142603.jpg" size="50" width="1500" height="1414" darkWidth="1500" darkHeight="1414" position="center" showCaption="false"} # Digital Acoustics IP7 This guide is created and tested with the Digital Acoustics IP7 (from now on called IP7). As the IP7 can be used in TalkMaster FOCUS mode or with a different firmware in S3 mode. This manual describes both options. After setting-up the IP7, please install the CyberGate app for Microsoft Teams. Use the CyberGate app for Microsoft Teams to: - Open the door of the intercom by simply clicking on an Open-door button - See the status of your intercom and calling the intercom from Teams by clicking on just one button - Set your Availability status in a configured CyberGate Multi-ring group with one click Installation of the CyberGate app for Microsoft Teams is highly recommended. *** ## Prerequisites Before the IP7 can be configured for CyberGate, a CyberGate Call group needs to be configured that serves as call destination for the IP7. :::hint{type="info"} *Please see *[CyberGate Call Group Settings](docId\:Tr1fiZxGrSHmxfhYFvnzj)* for instructions on how to create a Call Group.* ::: *** ## Configure the IP7 with TalkMaster FOCUS The IP7 needs to be configured using the Digital Acoustics TalkMaster Focus software. Complete the following steps in order. *** Connect the IP7 to the network, power it on, and open the Focus Administration Console. Log in with username `admin` and the configured password. Navigate to the IP Endpoints menu and click the **Find All button** to find the IP7. Select the device to configure and navigate to **General - Configuration**. Change / modify the following: | **General - Configuration** | | | --------------------------- | ----------------------------------------- | | Type | Client | | Authorized IP Endpoint | `Enabled` | | Server IP | IP address of the Talkmaster Focus server | Click **Save**. ![](https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/oXJV-ikzUecW4COKUGP4q-20260610-145225.jpg "DA - General - Configuration") *** Navigate to **General - Opt 1**. Change / modify the following: | **General - Opt 1** | | | -------------------------- | --------------------- | | Input source | Select **Microphone** | | Use UDP/RTP | `Enable` | | Supports Full Duplex Audio | `Enable` | Click **Save**. ![](https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/IX0TNQPOGrgAnT9dQan3i_da-esip-options1-echt.png "DA - General - Opt 1") *** Navigate to **General - Opt 2**. Change / modify the following: | **General - Opt 2** | | | ------------------- | ---- | | Default Microphone | uLaw | Click **Save**. ![](https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/g0Rw4DoVkYzW-h2gxjNmz-20260610-142602.jpg "DA - General - Opt 2") *** Navigate to **eSIP - Options 1**. Change / modify the following: | **eSIP - Options 1** | | | --------------------------- | ------------------------------------------------------------ | | Select | Dial SIP Extension On PTT | | Primary Registrar | cybergate.cybertwice.com; 5060 | | Primary Server | cybergate.cybertwice.com; 5060 | | SIP Local Port | 5060 | | RTP Port | 22000 | | SIP Extension | Use the Username provided by the CyberGate Management Portal | | SIP Password | Use the Password provided by the CyberGate Management Portal | | SIP Authentication | Use the Username provided by the CyberGate Management Portal | | *Out Dial Extension* **\*** | 500 | Click **Save**. :::hint{type="info"} *\* The Out Dial Extension must be a number that corresponds with a Call Group that has the same number as its name and is configured in the CyberGate Management Portal earlier. * *Calling this number will actually call the corresponding Call Group in CyberGate and thus the participants in the group.* ::: ![](https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/A-wRUFhaF2cEO4uGsjfD9_aangepastu51hfm-tdlvnv5dokdyke-20260610-142601.jpg "DA - eSIP - Option 1") *** Navigate to **eSIP - Options 2**. Change / modify the following: | **eSIP - Options 2** | | | -------------------- | --------- | | SIP/TCP | `Enabled` | Click **Save**. ![](https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/RTOhsOHmKZTHqT5r60QkZ-20260610-142601.jpg "DA - eSIP - Option 2") *** ### Test the IP7 (TalkMaster FOCUS) Configuration is now complete. Press the button on the IP7 to initiate a call to the configured Teams user. ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/ClgYSuXn09ihoBRdEWGtT-20260420-134055.jpg" size="50" width="300" height="220" darkWidth="300" darkHeight="220" position="center" showCaption="false"} If everything is configured correctly, the Teams client notifies the user of an incoming call. Answer it by clicking the phone symbol. The call is established. To open the door from the Teams call, use ‘Dial Pad’ button in the Teams bar and click **5# **(default setting for an IP7) to trigger the relay of the IP7 and open the door. :::hint{type="info"} *A more convenient way to open the door during a call is to use the CyberGate for Teams app. See the 'CyberGate App for Microsoft Teams' chapter on how to to install and use the CyberGate for Teams app.* ::: *** ## Configure the IP7 with the S3 firmware The IP7 needs to loaded with the S3 firmware first. Complete the following steps in order. *** Connect the IP7 to the network, power it on, and open the Digital Accoustics Device Discovery tool. Click the **Refresh** button to find the IP7 and use the **Open Web Page** button to log in to the IP7. Log in with username `admin` and the configured password. The default page that opens is **General**. :::hint{type="warning"} Check if the DNS Server(s) are valid as this is a requirement for CyberGate. ::: *** Navigate to SIP. Change / modify the following: | **SIP** | | | ----------------------- | ------------------------------------------------------------ | | Enable SIP | `Enable` | | Full Duplex | `Enable` | | Enable G722 | `Enable` | | SIP TCP | `Enable` | | Primary Registrar | cybergste.cybertwice.com \| port 5060 | | Primary Server | cybergste.cybertwice.com \| port 5060 | | SIP Local Port | 5060 | | RTP Local Port | 22000 | | Extension | Use the Username provided by the CyberGate Management Portal | | Password | Use the Password provided by the CyberGate Management Portal | | Authentication | Use the Username provided by the CyberGate Management Portal | | Outdial on PTT | `Enable` | | *Out dial Extension \** | 500 | Click **Submit**. :::hint{type="info"} *\* The Out Dial Extension must be a number that corresponds with a Call Group that has the same number as its name and is configured in the CyberGate Management Portal earlier. * *Calling this number will actually call the corresponding Call Group in CyberGate and thus the participants in the group.* ::: ![](https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/heis5La1URHEAgtJ1I_ok_sip-vol.png "DA - S3 - SIP (Full)") Navigate to Audio. Make sure the 'Audio Input' is set to **Microphone**. ![DA - S3 - Audio](https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/EC2seKlkX-XHIKieCy2HM_audio.png) *** ### Test the IP7 (S3) Configuration is now complete. Press the button on the IP7 to initiate a call to the configured Teams user. ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/ClgYSuXn09ihoBRdEWGtT-20260420-134055.jpg" size="50" width="300" height="220" darkWidth="300" darkHeight="220" position="center" showCaption="false"} If everything is configured correctly, the Teams client notifies the user of an incoming call. Answer it by clicking the phone symbol. The call is established. To open the door from the Teams call, use ‘Dial Pad’ button in the Teams bar and click **5# **(default setting for an IP7) to trigger the relay of the IP7 and open the door. :::hint{type="info"} *A more convenient way to open the door during a call is to use the CyberGate for Teams app. See the 'CyberGate App for Microsoft Teams' chapter on how to to install and use the CyberGate for Teams app.* ::: *** # CyberGate App for Microsoft Teams The CyberGate App for Microsoft Teams offers more CyberGate features directly from Microsoft Teams. One of these features is the Open-door button. This button can be utilized during a call to CyberGate and lets you open the the door by clicking just one button. For a description on how to install the CyberGate app and use the Open door button please see the [CyberGate App for Teams](docId\:VT83XIEgHU9122S-Glb5Q) manual.