--- title: IpDoor and CyberGate slug: ipdoor-and-cybergate docTags: createdAt: 2026-04-07T11:07:08.770Z --- ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/1Ah7MVbQkfq375nBXJBak_ipdoor-ip120d10.png" size="24" width="529" height="1460" position="center" darkWidth="529" darkHeight="1460" showCaption="false"} *** # Configure the IpDoor for CyberGate For this document we used the IpDoor Touch video door phone (from now on named 'IpDoor') to connect to the CyberGate service (from now on named 'CyberGate'). The IpDoor Flush video door phone will also work with CyberGate. Follow these steps to configure the IpDoor to connect it to CyberGate. *** ## Pre-configuration steps The IpDoor needs two licenses to connect to CyberGate: - A SIP license - An IP Phone license Both licenses need to be purchased from your IpDoor supplier before installing the IpDoor for CyberGate :::hint{type="warning"} *After configuration, the IpDoor is able to call a configured Teams user or CyberGate Call group, but it is not possible to call the IpDoor from Microsoft Teams!* ::: *** ### Connect the IpDoor 1. Connect the IpDoor to the network, power it on, and open a web browser to: [https://console.ipdoor.com](https://console.ipdoor.com) 2. Sign in with your IpDoor account to configure the IpDoor. When successfully signed in, the main menu is shown. 3. Create a new system using the QR code supplied with the IpDoor. ::::VerticalSplit{layout="middle"} :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/3KkM_W_T7gdA8Zx01Ymil_ipdoor-create-newsystem.jpg" size="60" isUploading="false" width="890" height="1832" darkWidth="890" darkHeight="1832" position="center" showCaption="false" indent="1"} ::: :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/TFmuMr16fn8bSEu2hPVa2_ipdoor-registration-activation.jpg" size="70" isUploading="false" width="886" height="1832" darkWidth="886" darkHeight="1832" position="flex-start" showCaption="false" indent="2"} ::: :::: *** 4. Activate the product. ::::VerticalSplit{layout="middle"} :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/jeOQUQ9b8o5SNVIpbSuxj_ipdoor-code-valid.jpg" size="70" isUploading="false" width="964" height="1832" darkWidth="964" darkHeight="1832" position="center" showCaption="false" indent="2"} ::: :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/sJXmviyH7dEam7FCEF7kw_ipdoor-associate-house.jpg" size="70" isUploading="false" width="1004" height="1832" darkWidth="1004" darkHeight="1832" position="flex-start" showCaption="false" indent="2"} ::: :::: *** 5. Define the location of the system. In this example, our building is called 'CyberTwice HQ'. ::::VerticalSplit{layout="middle"} :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/FTRTBgzNK2bGMydmKPQe4_ipdoor-home-building-info.jpg" size="70" isUploading="false" width="854" height="1832" darkWidth="854" darkHeight="1832" position="center" showCaption="false" indent="2"} ::: :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/q6v9xGCYcR1ACqL2fdzgB_ipdoor-system-location.jpg" size="70" isUploading="false" width="922" height="1832" darkWidth="922" darkHeight="1832" position="flex-start" showCaption="false" indent="2"} ::: :::: *** 6. Create a device. Optionally supply a building number and/or message; these will be displayed on the IpDoors display. ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/c5bdJeXDnlNR2-FLd-k-y_ipdoor-device-info-vol.jpg" size="40" isUploading="false" width="844" height="1832" darkWidth="844" darkHeight="1832" position="center" showCaption="false"} ::::VerticalSplit{layout="middle"} :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/VWZkD2DHiyxe_hPrEPDgn_ipdoor-build-number.jpg" size="70" isUploading="false" width="866" height="1832" darkWidth="866" darkHeight="1832" position="center" showCaption="false" indent="2"} ::: :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/O-fixqlyx4ka1HNGhQkV6_ipdoor-message.jpg" size="70" isUploading="false" width="870" height="1832" darkWidth="870" darkHeight="1832" position="flex-start" showCaption="false" indent="2"} ::: :::: *** 7. Continue with the button configuration. ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/r4bYs1lKvsIOdiDSVbupD_ipdoor-call-buttons.jpg" size="40" isUploading="false" width="890" height="1832" darkWidth="890" darkHeight="1832" position="center" showCaption="false"} *** 8. Name the button. In this example we keep the default name for the button 'Family name n.1'. Invitation of users is optional. ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/ZvuY7ySwC-pGUiBzeA2Ga_ipdoor-call-buttons-configuration.jpg" size="40" isUploading="false" width="800" height="1832" darkWidth="800" darkHeight="1832" position="center" showCaption="false"} ::::VerticalSplit{layout="middle"} :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/Zd-fD4-843L5y2ROogLo0_ipdoor-call-buttons-configuration-invite.jpg" size="70" isUploading="false" width="852" height="1832" darkWidth="852" darkHeight="1832" position="center" showCaption="false" indent="2"} ::: :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/gK19UM7jVu5smnM5H_V5K_ipdoor-call-buttons-configuration-invite-shared.jpg" size="70" isUploading="false" width="910" height="1832" darkWidth="910" darkHeight="1832" position="center" showCaption="false" indent="2"} ::: :::: *** 9. Configure the output to use the built-in relay switch. 10. Select the function type (in this example 'door') and customize the name. ::::VerticalSplit{layout="middle"} :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/JQYvujUxfmJmdnJlwFT5o_ipdoor-configure-output.jpg" size="70" isUploading="false" position="center" width="902" height="1832" darkWidth="902" darkHeight="1832" showCaption="false"} ::: :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/4tXfIjohZjsssgd53TtR9_ipdoor-configure-output-select.jpg" size="80" isUploading="false" width="886" height="1832" darkWidth="886" darkHeight="1832" position="flex-start" showCaption="false" indent="2"} ::: :::: ::::VerticalSplit{layout="middle"} :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/HNX1ooOU4FrZra7rX_5Z8_ipdoor-configure-output-select-set.jpg" size="80" isUploading="false" width="884" height="1832" darkWidth="884" darkHeight="1832" position="flex-start" showCaption="false" indent="2"} ::: :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/BShCHXKa2zLjAvgnSSFAL_cybergate-ipdoorpdf-11-1.png" size="70" isUploading="false" width="390" height="809" darkWidth="390" darkHeight="809" showCaption="false"} ::: :::: When the 'Configuration completed!' screen shows, the base configuration is done. ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/N-fdIzaT9Uxq4I4emAthb_cybergate-ipdoorpdf-11-0.png" size="40" isUploading="false" width="394" height="807" darkWidth="394" darkHeight="807" showCaption="false"} *** ### Add and activate the SIP license Next is the configuration of the IpDoor to communicate with CyberGate. For the IpDoor to function with CyberGate, two licenses are needed: a SIP license and an IP Phone license (both must be purchased from your IpDoor supplier). 1. First, add the SIP license (in the Licenses menu, SIP account). ::::VerticalSplit{layout="middle"} :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/p6P5xe_DXc3QrzHm7nZNm_ipdoor-base-config-done.jpg" size="70" isUploading="false" width="884" height="1832" darkWidth="884" darkHeight="1832" position="center" showCaption="false" indent="2"} ::: :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/uI9U7ClgQEhNGjPIOkpAn_ipdoor-license-sipaccount.jpg" size="70" isUploading="false" width="880" height="2910" darkWidth="880" darkHeight="2910" position="flex-start" showCaption="false" indent="2"} ::: :::: *** 2. Add and activate the SIP license. ::::VerticalSplit{layout="middle"} :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/sjBIZ8wCtnc0gHG3Ef_26_ipdoor-license-sipaccount-leeg.jpg" size="70" isUploading="false" width="888" height="1832" darkWidth="888" darkHeight="1832" position="center" showCaption="false" indent="2"} ::: :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/ob9dCVOXaI_iCpDiYPKyD_ipdoor-license-sipaccount-activate.jpg" size="70" isUploading="false" width="890" height="1832" darkWidth="890" darkHeight="1832" position="flex-start" showCaption="false" indent="2"} ::: :::: ::::VerticalSplit{layout="middle"} :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/puE53xXUeFrKNTgzLmj6m_ipdoor-license-sipaccount-valid-code.jpg" size="70" isUploading="false" width="866" height="1832" darkWidth="866" darkHeight="1832" position="center" showCaption="false" indent="2"} ::: :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/9un7DWj5zODlXeelzpQ87_ipdoor-license-sipaccount-activated.jpg" size="70" isUploading="false" width="866" height="1832" darkWidth="866" darkHeight="1832" position="flex-start" showCaption="false" indent="2"} ::: :::: ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/1mRGIbfsYvK1zPyvwBTNd_ipdoor-sipaccount-leeg.jpg" size="40" isUploading="false" width="888" height="1832" darkWidth="888" darkHeight="1832" position="center" showCaption="false" indent="2"} 3. When added, select the user to use this license (in this example 'Test device'). ::::VerticalSplit{layout="middle"} :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/Q_Qi3sZH4Be2YJ5y_98dZ_ipdoor-sipaccount-license-user.jpg" size="70" isUploading="false" width="886" height="1832" darkWidth="886" darkHeight="1832" position="center" showCaption="false" indent="2"} ::: :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/KwRES7YgAdll_AZkMO6n-_ipdoor-sipaccount-license-user-select.jpg" size="70" isUploading="false" width="882" height="1832" darkWidth="882" darkHeight="1832" position="flex-start" showCaption="false" indent="2"} ::: :::: 4. Open the Device section and edit the device. ::::VerticalSplit{layout="middle"} :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/qEXBgCYdWn2Ow43Cg6s16_ipdoor-home-device.jpg" size="50" isUploading="false" width="880" height="1832" darkWidth="880" darkHeight="1832" position="center" showCaption="false" indent="2"} ::: :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/FtAbp7y_0EreNf3ZC2Bv4_ipdoor-device-testdevice.jpg" size="50" isUploading="false" width="890" height="1832" darkWidth="890" darkHeight="1832" position="center" showCaption="false" indent="2"} ::: :::: *** ### Configure the SIP account 1. Click on 'Settings' and 'SIP Account'. ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/fxzmFd_776HzFEuUn6pvK_ipdoor-device-testdevice-settings.jpg" size="40" isUploading="false" position="center" width="890" height="1832" darkWidth="890" darkHeight="1832" showCaption="false"} 2. Provide/change the following information: | **SIP account** | | | ----------------- | ------------------------------------------------------------ | | Username | Use the Username provided by the CyberGate Management Portal | | Authentication ID | Use the Username provided by the CyberGate Management Portal | | Password | Use the Password provided by the CyberGate Management Portal | | Domain | cybergate.cybertwice.com | | Protocol | Switch to TCP | 3. Click 'Done'. ::::VerticalSplit{layout="middle"} :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/zsGoTGI38Nlco3KzSgZKX_ipdoor-device-testdevice-settings-sipaccount.jpg" size="70" isUploading="false" width="986" height="2108" darkWidth="986" darkHeight="2108" position="center" showCaption="false" indent="2"} ::: :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/NvOt5cGObe89P03iJGZx4_ipdoor-device-testdevice-settings-sipaccount-vol.jpg" size="70" isUploading="false" width="1046" height="2108" darkWidth="1046" darkHeight="2108" position="flex-start" showCaption="false" indent="2"} ::: :::: The configured SIP account will automatically register. The registration state will be shown (this can take some time). ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/89vzt5RY7Fihv9FbsBWZI_ipdoor-device-testdevice-sipstatus.jpg" size="40" isUploading="false" width="890" height="1832" darkWidth="890" darkHeight="1832" position="center" showCaption="false" indent="2"} *** ### Add the IP Phone call destination 1. Go back to the start screen and -within the Devices section- add a new device. 2. Select 'Other device', then select 'IP Phone'. ::::VerticalSplit{layout="middle"} :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/l0mPn7uXzeGdUR-zWShm4_ipdoor-device-plus.jpg" size="50" isUploading="false" width="892" height="1832" darkWidth="892" darkHeight="1832" position="center" showCaption="false" indent="2"} ::: :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/8FUbmq8dUh6Phz3UOIZdQ_ipdoor-device-plus-other-device.jpg" size="50" isUploading="false" width="888" height="1832" darkWidth="888" darkHeight="1832" position="center" showCaption="false" indent="2"} ::: :::: ::::VerticalSplit{layout="middle"} :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/YDcRK0P58LbL8mVb_WEOS_ipdoor-device-plus-other-device-ipphone.jpg" size="50" isUploading="false" width="888" height="1832" darkWidth="888" darkHeight="1832" position="center" showCaption="false" indent="2"} ::: :::VerticalSplitItem ::: :::: *** 3. For the IP Phone, you will need a license (available at your IpDoor supplier). Scan the QR code for the license. ::::VerticalSplit{layout="middle"} :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/qchONXX5DXEZ-TrSsESxF_ipdoor-device-plus-other-device-missing-license.jpg" size="70" isUploading="false" width="1374" height="1832" darkWidth="1374" darkHeight="1832" position="center" showCaption="false" indent="2"} ::: :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/FAEG6OWbpgnRc_8z-QFiV_ipdoor-device-plus-other-device-scan-code.jpg" size="70" isUploading="false" width="1000" height="1820" darkWidth="1000" darkHeight="1820" position="flex-start" showCaption="false" indent="2"} ::: :::: *** 4. When successfully added, provide/change the following information: | **IP Phone** | **** | | ------------------ | ------------------------------------------------------------------------- | | SIP Phone | Descriptive name for the call destination (in this example 'Koos Ridder') | | Username | Use the Teams user address without the domain part \* | | Domain | cybergate.cybertwice.com | | Protocol | Switch to TCP | | Two-way video call | Enable to also display the Teams user on the display of the IpDoor | :::Paragraph{indent="1"} \* For example, the user 'Koos Ridder', with the Teams name: [koos.ridder@mycompany.com](mailto\:koos.ridder@mycompany.com) will translate to this destination address: *koos.ridder* ::: 5. Click 'Done'. ::::VerticalSplit{layout="middle"} :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/4wfhpCD9wxmAjXdKOvBIk_ipdoor-device-plus-other-device-sip-leeg.jpg" size="70" isUploading="false" width="888" height="1832" darkWidth="888" darkHeight="1832" position="center" showCaption="false" indent="2"} ::: :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/VyD1LXDOuzds6SXnq_X_u_ipdoor-device-plus-other-device-sip-vol.jpg" size="70" isUploading="false" width="886" height="1832" darkWidth="886" darkHeight="1832" position="flex-start" showCaption="false" indent="2"} ::: :::: When finished, the Device section contains a device and an IP Phone (in this example 'Test device' and 'Koos Ridder'). ::::VerticalSplit{layout="middle"} :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/jXWoinHqDUWFomEGCqcYV_ipdoor-device-testdevice-settings-sipaccount-added.jpg" size="70" isUploading="false" width="888" height="1832" darkWidth="888" darkHeight="1832" position="center" showCaption="false"} ::: :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/SzYeGWF9Clc5lfzY_02E9_ipdoor-device-overview-metphone.jpg" size="70" isUploading="false" width="890" height="1832" darkWidth="890" darkHeight="1832" position="center" showCaption="false"} ::: :::: *** ### Add the IP Phone to the group 1. In the Group section, edit the group displayed. 2. Click on the 'Devices' button. ::::VerticalSplit{layout="middle"} :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/K8VYY3gxeDgUoxQvGqySX_ipdoor-groups-edit.jpg" size="70" isUploading="false" width="892" height="1832" darkWidth="892" darkHeight="1832" position="center" showCaption="false" indent="2"} ::: :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/-evm5vvw5qMrSJT7sMy0G_ipdoor-groups-edit-devices.jpg" size="70" isUploading="false" width="894" height="1832" darkWidth="894" darkHeight="1832" position="flex-start" showCaption="false" indent="2"} ::: :::: 3. Select the IP Phone (in our case 'Koos Ridder') to take part in this group. 4. Navigate back to the main menu. ::::VerticalSplit{layout="middle"} :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/jXtcAN1YqYZtmPE5XcXL-_ipdoor-groups-edit-devices-select-phone.jpg" size="70" isUploading="false" width="892" height="1832" darkWidth="892" darkHeight="1832" position="center" showCaption="false" indent="2"} ::: :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/lvYRfHiF-ectziDz20Z8V_ipdoor-groups-edit-devices-phone-added.jpg" size="70" isUploading="false" width="892" height="1832" darkWidth="892" darkHeight="1832" position="flex-start" showCaption="false" indent="2"} ::: :::: *** ### Configure the door-open code 1. To configure the code to open the door during a call, open the Device section and edit the device ('Test device'). 2. Select 'Configuration'. ::::VerticalSplit{layout="middle"} :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/HJI6CWEoWch8cJB1eal6K_ipdoor-door-device-edit.jpg" size="70" isUploading="false" width="886" height="1832" darkWidth="886" darkHeight="1832" position="center" showCaption="false" indent="2"} ::: :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/5Wz4d5kElELPZCb-lawnD_ipdoor-door-device-edit-configuratio.jpg" size="70" isUploading="false" width="888" height="1832" darkWidth="888" darkHeight="1832" position="flex-start" showCaption="false" indent="2"} ::: :::: 3. Select 'Codes' and add a new code. ::::VerticalSplit{layout="middle"} :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/OSePqdMPFGjE7Jo6aqbJO_ipdoor-door-device-edit-configuration-codes.jpg" size="70" isUploading="false" width="886" height="1832" darkWidth="886" darkHeight="1832" position="center" showCaption="false" indent="2"} ::: :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/WTc3lYmPPzqcmvlhaVPij_ipdoor-door-device-edit-configuration-codes-add.jpg" size="70" isUploading="false" width="884" height="1832" darkWidth="884" darkHeight="1832" position="flex-start" showCaption="false" indent="2"} ::: :::: 4. Provide/change the following information: | New code | | | ---------- | ----------------------------------------------------------------------------------------- | | Code name | Descriptive name for this code (in this example 'Door open') | | Code value | In this example '0000' (any other code is possible, as long as it starts
with a '0') | | Typology | Deselect 'Keyboard' to use this code only for Dual-Tone Multi-Frequency (DTMF) | 5. Click 'Confirm'. 6. Edit the newly created code. ::::VerticalSplit{layout="middle"} :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/SW0UfbKzk4gH0E2xkBnil_ipdoor-door-device-edit-configuration-codes-add-newcode.jpg" size="70" isUploading="false" width="884" height="1832" darkWidth="884" darkHeight="1832" position="center" showCaption="false" indent="2"} ::: :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/0x3eICNNkLq9CUAAGYZNX_ipdoor-door-device-edit-configuration-codes-add-newcode-add.jpg" size="70" isUploading="false" width="888" height="1832" darkWidth="888" darkHeight="1832" position="flex-start" showCaption="false" indent="2"} ::: :::: 7. Select 'Activations' and confirm. ::::VerticalSplit{layout="middle"} :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/HkOULiFIwuBMzL0g0KH_p_ipdoor-door-device-edit-configuration-codes-add-newcode-edit-activations.jpg" size="70" isUploading="false" width="890" height="1832" darkWidth="890" darkHeight="1832" position="center" showCaption="false" indent="2"} ::: :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/l-i865pq05WrJ7Cm8TkO7_ipdoor-door-device-edit-configuration-codes-add-newcode-edit-activations-new.jpg" size="70" isUploading="false" width="884" height="1832" darkWidth="884" darkHeight="1832" position="flex-start" showCaption="false" indent="2"} ::: :::: 8. Select the already configured switch (in this example 'Door') and confirm. ::::VerticalSplit{layout="middle"} :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/X0MSkzfotf3JdMfM-WDRD_ipdoor-door-device-edit-configuration-codes-add-newcode-edit-activations-new-select.jpg" size="70" isUploading="false" width="886" height="1832" darkWidth="886" darkHeight="1832" position="center" showCaption="false" indent="2"} ::: :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/oI_8bQRFU89-kyV9-0y7B_ipdoor-door-device-edit-configuration-codes-add-newcode-edit-activations-new-select-confirm.jpg" size="70" isUploading="false" width="888" height="1832" darkWidth="888" darkHeight="1832" position="flex-start" showCaption="false" indent="2"} ::: :::: The newly created code is now configured to operate the built-in switch. ::::VerticalSplit{layout="middle"} :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/zjaY9vYJ6YYGlEFUHtN32_ipdoor-door-backtoconfiguration.jpg" size="70" isUploading="false" width="894" height="1832" darkWidth="894" darkHeight="1832" position="center" showCaption="false"} ::: :::VerticalSplitItem ::: :::: *** ## Verify the configuration Configuration of the IpDoor is now finished. Pressing the call button on the IpDoor touch screen will initiate a call to the number configured in the IpDoor. The call will be established and video will be displayed within ±3 seconds. ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/4seDXGYYcavG8wRXUiR9U_cybergate-ipdoorpdf-32-0.png" size="50" isUploading="false" width="418" height="307" darkWidth="418" darkHeight="307" showCaption="false" indent="2"} ::Image[]{src="https://api.archbee.com/api/optimize/9udbSbjbe1Qxd-sSYHAdw/k113aNfKj4iAyRJAtRPKc_cybergate-ipdoorpdf-32-1.png" size="100" isUploading="false" width="886" height="523" darkWidth="886" darkHeight="523" showCaption="false" indent="2"} To open the door from the Teams call: 1. Click on the three dots (...) in the call screen and select the 'Keypad'. 2. Use the '0000' code (as set in the IpDoor earlier); this will trigger the switch in the IpDoor and open the door. :::hint{type="info"} *A more convenient way to open the door during a call is to use the CyberGate for Teams app. See the *[CyberGate App for Teams](docId\:VT83XIEgHU9122S-Glb5Q)* manual on how to to install and use the CyberGate for Teams app.* :::