CyberGate Device manuals
2N and CyberGate
Microsoft Teams is the hub for team collaboration in Microsoft Office 365 that integrates people content, conversations and tools your team needs. Via the CyberGate application that runs in Microsoft Azure you can now connect 2N IP Intercoms to your Microsoft Teams environment.
2N Indoor View and CyberGate
For this document we used the 2N IP Indoor View (from now on named '2N') to connect to the CyberGate service (from now on named 'CyberGate'). Described use cases Call from 2N Indoor View through CyberGate to a Teams user or a Call group Call from a Teams user through CyberGate to the 2N Indoor View The 2N IP Indoor View is able to set up a secure connection to CyberGate using SIP TLS and SRTP.
Akuvox and CyberGate
This guide was written and tested with the Akuvox R26C SIP video doorphone. Other Akuvox SIP video doorphones from the R2x series are also able to connect to CyberGate.
Algo and CyberGate
This guide explains how to configure an Algo SIP video intercom to connect to your Microsoft Teams environment through the CyberGate service. Microsoft Teams users can then answer incoming intercom calls – with 2-way audio and live video – on the Teams desktop client, Teams desk phone or Teams Smartphone app, and open the door for visitors.
Algo IP Speakers, Pagers, Alerters and CyberGate
This manual describes how to connect Algo IP speakers, paging adapters, and visual alerters to Microsoft Teams using the CyberGate service from CyberTwice. It covers the basic Session Initiation Protocol (SIP) configuration of the Algo device, the required settings in the CyberGate Admin portal, calling the device from Microsoft Teams, and enabling secure communication over SIP-TLS.
Avigilon and CyberGate
This guide uses an Avigilon H4 video intercom (referred to as "the Avigilon" below) connecting to the CyberGate service (referred to as "CyberGate" below). Make sure the following prerequisites are met before you begin Connect the Avigilon to the network and power it on.
AXIS and CyberGate
For this document the AXIS A8105-E Network Video Doorstation (from now on named ‘AXIS’) is used to connect to the CyberGate service (from now on named ‘CyberGate’). This manual also applies to the following Axis Video Doorstations Axis A8004-VE Axis A8207-VE Axis I8016-LVE Follow the next steps to configure the AXIS to connect it to CyberGate.
AXIS Intercoms and CyberGate
This guide shows you how to configure an AXIS Network Video Doorstation to connect to the CyberGate service, so that pressing the call button on the doorstation rings a recipient in Microsoft Teams. It covers the SIP account setup, DTMF for door-opening, the recommended SIP-TLS (SIP over Transport Layer Security) hardening, and a pointer to the companion CyberGate App for Microsoft Teams, which adds a one-click Open-door button inside Teams.
Axis cameras and CyberGate
For this document the following AXIS camera is used to connect to the CyberGate service (from now on named 'CyberGate'). AXIS M1075-L Box Camera This document applies to all recent Axis cameras that offer SIP support.
AXIS Network Audio and CyberGate
This guide uses the following AXIS Network Audio devices to connect to the CyberGate service (from now on named 'CyberGate') AXIS C8110 Network Audio Bridge AXIS C1410 Network Mini Speaker All other AXIS Network Speakers and AXIS Audio System Devices are also compatible with CyberGate. Configure a single AXIS device — connect a stand-alone AXIS device (the AXIS C1410 Network Mini Speaker in this example) to CyberGate.
Barix Audio over IP and CyberGate
This guide uses a Barix Annuncicom MPI400 (referred to below as "Barix") connecting to the CyberGate service (referred to below as "CyberGate"). The same procedure applies to the following Barix products Annuncicom MPI400 Exstreamer MPA400, M400 IP Former TPA400 The following Barix products are certified for secure communication with CyberGate using TLS (Transport Layer Security) and SRTP (Secure Real-time Transport Protocol) Exstreamer MPA400 Exstreamer M400 IP Former TPA400 If your device is not in the certified list, fall back to UDP (User Datagram Protocol) for transport.
BAS-IP and CyberGate
For this document we tested the BAS-IP AA-12B and the BAS-IP AV-03BD (from now on named 'BAS-IP') to connect to the CyberGate service (from now on named 'CyberGate'). This manual applies to the following BAS-IP intercom systems AA-07 (B, FB, FB2M) AA-09B AA-11B AA-12 (B, FB, FB2M) AA-14 (FB, FB2M) BI-02FB BI-04FB BI-06FB BI-08FB AV-01 (D, BD, ED, MD, MFD, KD) AV-02D AV-03 (D, BD) AV-04 (SD, FD) AV-05 (SD, FD) Follow the next steps to configure the BAS-IP to connect it to CyberGate.
Behnke and CyberGate
This document uses the Behnke SIP Door Station series 20 (referred to from here on as "Behnke") to connect to the CyberGate service (referred to from here on as "CyberGate"). Compatible Behnke SIP door stations Behnke SIP intercoms 3.
Castel and Cybergate
For this document we used the CASTEL XE VIDEO 1B (from now on referred to as 'Castel') to connect to the CyberGate service (from now on referred to as 'CyberGate'). All other CASTEL XELLIP Audio Video intercoms also work with CyberGate.
Commend and CyberGate
For this document we used the OD5 TDCM Outdoor Station (from now on named ‘Commend’). Other Commend SIP Intercom Stations (OD10, ID5, ID8, IM6) are also able to connect to the CyberGate service (from now on named 'CyberGate’).
Commend IP Speakers and Cybergate
For this guide a Commend AFLS 10H HG speaker (from now on referred to as the Commend speaker ) is used to connect to the CyberGate service (from now on referred to as CyberGate ). This manual applies to the following Commend IP speakers Commend AFLS 10H HG Commend AFLS 10H CW Commend AFLS 10H PW Commend AFLS 10H SC W The Commend IP speakers are certified for secure communication with CyberGate.
Commend VirtuoSIS and CyberGate
For this document we used an OD5 TDCM Outdoor Station configured behind a VirtuoSIS Intercom Server (from now on named 'VirtuoSIS') to connect to the CyberGate service (from now on named 'CyberGate'). All other Commend stations that can be connected to VirtuoSIS can also communicate with CyberGate.
Digital Acoustics and CyberGate
This guide is created and tested with the Digital Acoustics IP7 (from now on called IP7). As the IP7 can be used in TalkMaster FOCUS mode or with a different firmware in S3 mode.
DNAKE and CyberGate
For this document we used two different DNAKE intercoms to connect to CyberGate DNAKE S617 (from now on named 'DNAKE 617') DNAKE 280SD-C12 (from now on named 'DNAKE 280') Both devices have different interfaces and are described separately below. Follow the steps in this section to configure the DNAKE S617 and connect it to CyberGate.
Doorbird and CyberGate
For this document we used the Doorbird D1101V Brushed V2A (from now on named 'Doorbird') running firmware version 000131, but the following Doorbird Doorstations are also compatible with CyberGate and can be configured using this manual Doorbird D11x DoorBird D10x DoorBird D20x DoorBird D21x BirdGuard B10x Follow the steps in the sections below to configure the Doorbird and connect it to CyberGate. Connect the Doorbird to the network.
Fanvil and CyberGate
The following Fanvil devices are successfully tested for use with CyberGate. Tested devices Fanvil i61, i62, i63 and i64 Fanvil i66, i67 and i68 -> Support for 2-way video Fanvil A513W Fanvil A11V Configure TCP first, then secure.
Fanvil Pagers and CyberGate
Connect a Fanvil SIP pager (PA2S, PA3 or PA2) to Microsoft Teams using the CyberGate service. This guide shows administrators how to configure the pager's SIP registration, set up an optional call button, prepare the CyberGate Admin portal, and place calls between Microsoft Teams and the pager.
Fasttel FT800 or FT600 and CyberGate
This document uses the Fasttel FT800 and the Fasttel FT600 (each from now on named 'Fasttel') to connect to the CyberGate service (from now on named 'CyberGate'). The configuration differs per model Fasttel FT800 Fasttel FT600 Follow the steps in this section to configure the Fasttel FT800 to connect it to CyberGate.
Fasttel Wizard Elite and CyberGate
This document uses the Fasttel Wizard Elite IP FT2501 PVC (from now on named 'Fasttel') to connect to the CyberGate service (from now on named 'CyberGate'). Follow the steps below to configure the Fasttel to connect it to CyberGate.
FERMAX and CyberGate
For this document we used the FERMAX 1/W Video Meet Panel (from now on named 'FERMAX') to connect to the CyberGate service (from now on named 'CyberGate'). Follow the next steps to configure the FERMAX to connect it to CyberGate.
Genetec Sipelia and CyberGate
This guide describes how to connect Genetec Sipelia (from now on referred to as 'Sipelia') to CyberGate, the CyberTwice service that connects intercom systems to Microsoft Teams. After completing this configuration, intercoms connected to Sipelia — and the Sipelia Security Desk — can make audio and video calls to Microsoft Teams users and answer incoming calls from Teams.
Grandstream and CyberGate
This guide uses the Grandstream GDS3710 (from now on named 'Grandstream') to connect to the CyberGate service (from now on named 'CyberGate'). The Grandstream GDS3712 is also compatible with CyberGate.
Hanwha and CyberGate
In this guide, the Hanwha Techwin Network Intercom is referred to as 'the Hanwha', and the CyberGate service as 'CyberGate'. Make sure the firmware of the Hanwha is updated to its latest available version.
IpDoor and CyberGate
For this document we used the IpDoor Touch video door phone (from now on named 'IpDoor') to connect to the CyberGate service (from now on named 'CyberGate'). The IpDoor Flush video door phone will also work with CyberGate.
MOBOTIX and CyberGate
This guide explains how to connect a MOBOTIX C71 Indoor Ceiling Camera to Microsoft Teams using the CyberGate service, so the camera can place calls to Teams users and answer incoming Teams calls with two-way audio. It is written for administrators configuring the camera's SIP registration and outgoing call destination.
PortaDial and CyberGate
This guide explains how to configure two PortaDial intercoms — the PortaDial Elego cam and the PortaVision SIP — to connect to Microsoft Teams through the CyberGate service. It is targeted at administrators that manage CyberGate and the intercom hardware.
René Koch and CyberGate
This guide was written and tested with the René Koch doorphone and AVS2100. Other René Koch doorphone connected to a AVS2100 are also able to connect to CyberGate.
Robin and CyberGate
For this document, we used the Robin ProLine SIP Compact 5 MP IP camera Silver (from now on named 'Robin'), but all Robin SIP intercoms with a built-in camera running firmware version 3. 6.
Robin 1080p and CyberGate
For this document we used the Robin Proline SIP SV Touchscreen HD 1080p (from now on named ‘Robin’), but all Robin Proline SIP SV 1080p Intercoms with a built-in camera can be used to connect to the CyberGate service (from now on named ‘CyberGate’). Connect the Robin to the network and power it on.
Suprema and CyberGate
For this document we used the Suprema BioStation 3 (from now on named ‘Suprema’) to connect to the CyberGate service (from now on named ‘CyberGate’). The Suprema needs to be configured using the BioStar 2 software and using the touch interface on the BioStation 3.
TOA IP Audio Systems and CyberGate
This document describes how to connect TOA IP Audio Systems to Microsoft Teams using the CyberGate service registering the TOA device with CyberGate over SIP, configuring zone-paging via the TOA IP Paging Gateway, and completing the required setup in the CyberGate Management Portal. It is intended for administrators installing TOA IP audio equipment in a Microsoft Teams environment.
Valcom and CyberGate
Valcom IP endpoints can be used with CyberGate and Teams directly. In this configuration, the Valcom device registers with the CyberGate service and is proxied to Teams.
Verkada and CyberGate
For this document we tested the Verkada TD52 Video Intercom (from now on named ‘Verkada’) to connect to the CyberGate service (from now on named ‘CyberGate’). Follow the next steps to configure the Verkada to connect it to CyberGate.
Zenitel and CyberGate
For this document we used the Zenitel Vingtor-Stentofon TCIV 3+ (from now on named 'Zenitel') to connect to the CyberGate service (from now on named 'CyberGate'). This document can also be used for the following devices Zenitel Vingtor-Stentofon TCIV 2 Zenitel Vingtor-Stentofon TCIV 3 Zenitel Vingtor-Stentofon TCIV 2+ Zenitel Vingtor-Stentofon TCIV 3+ Zenitel Vingtor-Stentofon TCIV 5+ Zenitel Vingtor-Stentofon TCIV 6+ Please upgrade the Zenitel to the latest available firmware!